Create the bootable USB flash drive Macrium lets you create under "Other Tasks". Boot the flash drive making sure it can detect your USB external. If it does not then click the refresh icon. This 3. Windows XP Mode Disk Settings . Before you boot up your shiny new Windows XP virtual machine, you need to tweak a few settings. On the VirtualBox toolbar, press Settings. Head to System. Look at the Boot Order. Uncheck Floppy, and move it down the list. Promote Hard Disk to the top of the pile. Just like your host PC, the virtual machine has Option 1 - Using a floppy disk formatted in Windows . Before we can make a USB device bootable (specifically refering to USB thumbdrives!), we do need to get our hands on a bootable floppy. In all current Windows versions (including Windows 2000 and XP) we can do that by formatting a floppy disk. Open the Windows Explorer and right click the A It's entirely possible to do this via USB, but if time / future instances are a concern, the drive is a worthy investment. Use YUMI – Multiboot USB Creator to make your pen drive bootable. After making the pen drive bootable, restart your system and boot your pen drive. After that, the steps are easy to follow. Step 1: Download Windows 7 USB/DVD Tool and install it. Step 2: Run the program, click the Browse button to browse to your Windows 7 ISO image file. Step 3: In this step, you need to select your media type. As we are here to create a bootable USB, simply click on USB device button. Step 4: Select your USB flash drive from the drop down box and Temporarily set the USB FDD (USB Flash Disk Drive) to be listed right before the hard drive (or partition) that you will be installing Vista on in the hard drive Boot Priority order list in the BIOS. After you are finished installing Vista from the USB key, make the Vista hard drive (or partition) listed first in the hard drive Boot Priority uvnnqoG. Insert one of these disks into drive drive letter. This disk will become the Windows XP Setup Boot Disk. Press any key when you are ready. Continue with the process until all 6 disks are created; Insert the first created disk in the floppy drive and restart your computer; Boot from the disk; Continue with the instructions to begin the process. After Windows Setup Transfer Wizard completed I restarted the computer and then booted from USB drive. And I get this message: "NTLDR is missing". I turned on Windows XP and searched the original disk of Windows 7 and the NTLDR wasnt there. The disk is brand new and I have tested it on Virtual PC. No problems while installing it on the Virtual First type the 'drive' to boot from, here FS0: . Next you need to specify the efi-file, you can also use 'ls' or 'cd' commands to browse the folders on the USB drive. Provide file name (usually located below 'EFI') e.g. efi\boot\bootx64.efi . Hit Enter to boot from that EFI boot file. Open UNetbootin, select "Diskimage" and then browse for your Windows 7 ISO file. Check "Show all Drives" box and select your USB drive, example "/dev/sdb1". If the drive is "dev/sdb" then select "/dev/sdb1". Click "OK" button and wait for the files to be copied to the USB drive. Share. 6. Insert your thumb drive into a USB port on your computer, and launch PeToUSB. Click “Enable Disk Format” and enter a name for your disk in the Drive Label box. Click “Browse” in the To create a real, physical MS-DOS bootable floppy disk, use Windows to right-click on the A: drive icon and then choose format. Click on ‘Create an MS-DOS Startup disk’ to format the floppy disk as an MS-DOS bootable disk. Unless you need all the files on this floppy disk, delete all files EXCEPT IO.SYS, COMMAND.COM and MSDOS.SYS.

boot windows xp flash disk